Clear Pouring Topcoat 64oz

PRODUCT DETAILS

Create a smooth, high-end finish with this pouring topcoat. Dries to a lacquer-like, high-gloss finish. Ideal for canvases, wood panels, or other flat art surfaces. This one-step formula eliminates the need to mix harsh chemicals and flows into a self-leveling, crystal clear coat that will not yellow, leaving your artwork with its original vibrance.

• Water-based
• One-step process
• High-gloss finish

HOW TO USE CLEAR POURING TOPCOAT

Do not shake. Pour over dry, painted surface. Tilt surface for even coverage and drain off excess to prevent pooling. Smooth out sides with a palette knife or brush. Place at a 45° angle and allow to air dry overnight. If a thicker finish is desired, apply a second coat and place surface at the opposite 45° angle. Avoid disturbing surface while topcoat is drying. Application temperature above 50°F. Do not freeze. Water-based. Self-leveling. Non-yellowing. Soap and water clean up.

TIPS FOR CLEAR POURING TOPCOAT

Pour enough Clear Pouring Topcoat to cover the entire surface at one time. Tap the edge of the surface to help spread the product over the edges.

Use a gloved hand or a palette knife to wipe off excess from the edges.

If applying a second coat, ensure the first coat is dry. Most applications of Clear Pouring Topcoat will dry within 12-48 hours.

Mix Clear Pouring Topcoat with paint to produce a transparent tint. Be sure to mix well to ensure an even coat.

Care should be utilized when using tape to mask off the edges or other areas of the surface. When removing the tape, there is the possibility of breaking the film created by the paint. When removing the tape, wait until the paint is dry to touch. Use a craft knife to score along the edges of the tape. This will ensure the paint will not be pulled up with the tape.

To reduce the amount of waste, pour a small amount of Clear Pouring Topcoat about 3 inches from the edge. Tip until that side and edge are covered. Next, pour a larger amount close to the first poured area and tip in the opposite direction. Clear Pouring Topcoat is self-leveling, so it will level over the small ridge between the two sections.

DecoArt Clear Pouring Topcoat has outstanding adhesive properties. Paint pouring mixtures that contain paint conditioners and other latex paint additives may weaken the adhesion of the paint underneath the Clear Pouring Topcoat. This may cause the paint to pull away from the surface of the substrate. For best results on paint-poured artwork, use Clear Pouring Topcoat over pieces that use only acrylic paint and DecoArt Pouring Medium. Avoid using DecoArt Clear Pouring Topcoat over waxy or oily surfaces.